Habitat for Humanity, the University of Windsor, and nidus3D Partner on North America’s First Multi-Unit 3D Printed Homes
First-of-its-kind 3D residence to develop by Summer 2022 in Ontario, Canada
WINDSOR, Ontario–(BUSINESS WIRE)–#3D–Habitat for Humanity Windsor-Essex, is partnering with the University of Windsor and nidus3D – Canada’s leaders in 3D construction printing, on the nation’s first permitted 3D printed residential homes.
This historic project – on the site of Leamington’s The Bridge Youth Resource Centre – is a key step in increasing access to affordable housing in Canada.
“This will be a historic build, the first 3D printed homes for residential use in this country, and potentially a game-changing solution to the current housing crisis. Habitat Windsor-Essex is working with the University of Windsor to learn more about how this new technology can potentially shorten construction times, and, over time, reduce input costs. Habitat W-E will benefit from the learning here, and those learnings could have a far-reaching impact for Habitat, and for the construction industry more broadly,” said Fiona Coughlin, Executive Director & CEO Habitat for Humanity Windsor.
This build is partially funded through Canada Mortgage and Housing Corporation’s Innovation Fund. And thanks to the latest partnership with nidus3D, Habitat for Humanity is leaning on the company’s cutting-edge 3D construction technology to make home ownership more affordable in Canada.
“In Windsor-Essex alone, there are currently 6,500 individuals that are homeless or at risk of homelessness, and the current solutions are simply not adequate in addressing this issue,” said, Ian Arthur, President & Founder nidus3D. “nidus3D is driven by the mission for increasing access to housing, and we’re deeply honoured for building the first multi-unit 3D printed homes in North America. This historic build serves as proof-of-concept for future builds, and paves the path for quicker and more cost-effective homes for Canadian families.”
During COVID, there was devastating impact of co-living on rooming houses and other communal living spaces. There was loss of life that could have been prevented.
Krista Rempel, Executive Director for The Bridge Youth Resource Centre states, “We’re grateful for the opportunity to be part of this historic build. The Bridge is investing in housing through this collaborative opportunity to not only do their part in addressing this housing crisis but the initiative will also support on-going operating dollars to sustain the organization long-term.”
This first-of-its-kind project will result in four units, in a self-contained home each unit measuring 560 square feet.
“We are very proud to be an active partner and research collaborator in this landmark research project of 3D printed home construction,” said Dr. Sreekanta Das, Professor of Civil Engineering at the University of Windsor.
This construction project will help forming the design codes and standards on 3D printed constructions.
“We are excited about this innovative solution to addressing the national housing crisis,” said Hilda MacDonald, Mayor of the Municipality of Leamington. “We are very grateful the Municipality of Leamington was selected as the location of this first-of-its-kind fully accessible 3-D multi-unit residential build.”
The 3D printed homes will be available by Summer 2022 for individuals and couples in need of attainable housing. For more information, visit: 3D Printed Homes Partnership.
About Habitat for Humanity Windsor-Essex
Habitat for Humanity Windsor-Essex is a non-profit organization working for a world where everyone has a safe and decent place to live. You can support Habitat for Humanity Windsor-Essex by donating or shopping at the Restore located at 51 Edinborough St. in Windsor. Visit www.habitatwindsor.org for more information.
About nidus3D
nidus3D is a strategic partner and distributor of COBOD BOD2 printers based out of Kingston, Ontario. With experience in construction, lean manufacturing, and public affairs, the team at nidus3D is actively deploying 3DCP (3D Construction Printing) technology to lower building costs and increase access to housing that is resilient, efficient and sustainable, all while complying with Canadian building standards. Visit nidus3d.com for more information.
About The Bridge Youth Resource Centre
The Bridge is a non-profit organization focused on the vision to help every youth reach their potential. Individuals can learn more about The Bridge, including giving opportunities, by visiting www.thebridgeyouth.ca.
About University of Windsor
The University of Windsor is a leading research and teaching university located in Windsor, Ontario, Canada. The Department of Civil and Environmental Engineering is an academic department within the Faculty of Engineering that has been researching the development of environmentally-friendly, sustainable printing materials, as well as the applications of 3D printing in construction to resolve the ongoing domestic housing crisis.
Contacts
Habitat for Humanity Windsor-Essex
Fiona Coughlin
Executive Director, CEO
Mobile: 519-969-3762 x225
Email: fcoughlin@habitatwindsor.org
nidus3D Inc.
Ian Arthur
President, CEO
Mobile: 613-449-2745
Email: ian@nidus3d.com
University of Windsor
Sreekanta Das, PhD, PEng
Professor of Civil Engineering
Ph: 519-253-3000 x2507
Email: sdas@uwindsor.ca
Media Inquiries:
Jay Sachdev
Founder, CEO
Breathe Purpose Media
Mobile: 647-203-3595
Email: jay@breathepurposemedia.com
